vasiliy titov

Saved 5/23/18 10:39 AM from Alyo, garage...

What will be if not to grind in the valve? Test of sharoshka (vertical drills)  See details »

 
Video subtitles:
  • 00:00: [applause] car vase 2109 old carburetor [music] further raised even this
  • 00:40: valve valve exhaust valve blew out We have a siphonite, especially this is our second cylinder here he is already fully kicked through the taste through the hole inlet and yes through the launch on dry want to test new cutter
  • 01:10: to make them the city of Dnepropetrovsk master here is 16 valves of his 2108 lanos aveo such is the set here pilot for 8 millimeters one track means bottom cut both large and small valves inlet and outlet and for the admission separately for Thursday we cut off separately 45 degrees and for small valves also separately 45 degrees and up or still town means I'll cut through
  • 01:42: Dnepropetrovsk between the legs we'll see which of them remains a series of swell waves then Cherkassy and start with Kharkov I recently took away brought me the sharpening caretaker escaping tooth production Togliatti and gave to boring means To imprison one tooth Kharkov costs 50 hryvnia these are the two cutters cost
  • 02:12: imprison one and a half thousand hryvnia only a there are sharpening machines there only 80 g one piece all zombies and the cylinder head I cleaned the sandbanks and already turned and and profrezirovat head is a vase 2108 10 the old one is still made in the USSR aluminum here is also only born here
  • 02:42: When it is milled differently then looked Soviet still qualitatively made want 44000 seems to have been made here repair of a capital or simply a lemon head and so looks like a saddle before repair a little see the bottom cut wide
  • 03:18: very chamfer here is a crack even a small but coolant and here is not present but on that that here does not go because of frequent so and secondly heads I will work for 4 it's Venetia 2
  • 03:48: tracks I also brought me in the groove only that here this 80 hryvnia to imprison and here It is also after sharpening very similar to their products from Dnepropetrovsk here they are already well on modern appearance of course these much
  • 04:21: neatly done made it was very long ago , Dad bought it here now they do it And now it is not even known that the goal with when I bought this seller said already the machines there stretches but this I do not know so further from groove cutter sharpening took escaping city of Togliatti cone -shaped production wine Dnepropetrovsk
  • 04:53: have pilots as it is built in and they are here not removed by 8 millimeters in Togliatti here you can change the pilots to select more Tough , for example, I've already picked up one I throw it a little there, it finds two someone it's bundled it all [music] slips pilot sweep
  • 05:25: cutters Cherkassy it's like the canals of it and they have a collet clamp there on at 8 millimeters here this surface it will be inside the guiding bush this one is put and on the other side from the inside I twist so this mechanism and thereby The cone is from this side and with this
  • 06:00: The parties are bursting this sanga you are a clamp and becomes cone coaxial relatively and saddle guide bush Included here is also a 7 millimeters and separately I already showed video and for a long time also the set has acquired and Cherkassy on 16 valve vines so try as sets
  • 06:38: bust Well, here is less simply in the new therefore this one does not lyuftit so well I try 1 pilot l put the camera so or try the sky and the earth so you can see
  • 07:09: border Touch Now I'll pull it out after sharpening, too.
  • 07:42: she ripples from the tooth in those which are far away from each other, their first time after sharpening do so touch here everywhere
  • 08:18: there is take the neighboring village [music] here I scored strongly not see I have 2 I've already done one of your work
  • 08:48: maybe a little bit lowered and became them the surface is very nice island degassing the main thing will not reach here is seen misaligned clip it is not from touching too, a small swell is present
  • 09:29: much less than on the neighboring camping for how to try to remove Dnepropetrovsk not vinnytsya I'm this thing now Dnepropetrovsk from above smoothly and not cut it successfully pulls a jerking hand
  • 10:01: gives back slightly flattened language but still here we now take a pilot here VAZ Togliatti that is escaping tooth also they very acute now
  • 10:34: this is a record from the past so probably a camera
  • 11:13: I will put and will normally work with both hands the next pilot cylinder is baptized tank knife twisted spread knives they are adjustable under the big leave and try to eat in general three knives only
  • 11:45: from not everywhere yet touch absolutely without pressure not yet across the surface but the swell I have not
  • 12:48: I see here are three knives saddle 1 cylinder is Dnepropetrovsk only then I am mistaken in Vinnitsa I apologize further goes the second cylinder long ago bought Dnepropetrovsk next is the third cylinder
  • 13:22: Cherkassy adjustable in this cylinder very much was not coaxial there gasoline collapsed so you still need to let off top and bottom because here it is here the side still does not touch here it's black spot and the very last that is it is me the first cylinder only sharpened
  • 13:56: escaping tooth of Togliatti also he recently just that very much so also a little bit myself It is present but much less than in all the rest screw up the valve screwdriver The fleeing tooth cut down what
  • 14:28: but you will not live a goatee runaway zeros do not do the most successful
  • 14:58: the hour was sharp and completely gone lower part 2 [music] there is a little swell and a second cylinder with
  • 16:06: which all the gasoline escaped 2 saddles here is how, but even I have left did not begin to force and here from Cherkassy and took rough cut and then acceptance working chamfer 45 degrees without ripple
  • 16:37: swell without any gods there up a little bit there is here here is a small one that is not so important because that this is not a working chamfer inlet and outlet already cut through sharpening cutter escaping itching Togliatti she became very much the same Basics as it did not work out
  • 17:08: then I will use the following order in the beginning I will remove the hard work which very difficult to remove And then use these cutters which At me here a little bit as blunt it is possible so to express myself this old lady also has a day for me there was no sharpening so I finally
  • 17:42: they passed this as I have outlined here sharp and this I did not give and I will not give because she is very well Smoothes out all the rash records almost like from diamond balls it did not turn out almost like on a machine Of course this is the stone age of the cutter sweep of the zinger all this is now much stepped forward but the garage and nicknames a pretty deal is inexpensively possible as if
  • 18:14: the hand is full, it's almost like lathe she somehow try the drought and everything is not despise and see if they will bubbles or not after about a cut always check for alignment worked all the misha horns almost all of which we have but from normal 4 applications a piece of celifane
  • 18:44: from a pack of cigarettes and he should not pop up really I'll tug it torn holds holds a trifle of time writes that nothing you are rubbing by
  • 19:15: give one time for crackers without grinding want Inside to all co-axes they are after all this they these then longer go without critics say that the rubbing is not completely washed out good slap can learn how to lathe
  • 19:46: to cut in there nobody wipes them after the remains will not try It offers you a syrup not to wipe and so the drought of the region you start there does not rub dishonest if you have time, even there is no light no now try
  • 20:18: we will test the description of how often biscuits experiment it to find out it is this I I do not want to show them coolant fake there add the paint apparently Only here the fourth cylinder we have and usually here and here and for 4 traits cylinders here usually on new heads
  • 20:49: block cylinder on the Kalinin henna of all this is the kind of path that corrodes marriage when have you look no why it is not there maybe not because this head ussr can something with the cylinder block wow you pancake here its not really salting is good for mastheads a huge crater
  • 21:21: here on the new blocks here it seems solid such yes I yes yes yes shirt cooling it puts here one window cooling shirts and holes here Therefore, there is no corrosion in the head because the blocks a little bit in another way there is not this cut great then I'll try Pressurize how they behave not
  • 21:55: rubbed once a day in the korea and show you that these valves are not really rubbed there is visible if the bevel is worn Wiped if there is no means not wiped we serve passes [music]
  • 22:25: 5 lets go well maybe here the garbage in half, try it, which means we have Holding before the first ripped and and 5 try you need to pump more
  • 23:02: 4 valves still priterli at knock Vocal machine force of sky that can be seen
  • 23:46: no stripes matte surface at the plant if here to check sooner all too there will be bubbling there just checked or minimized such a vacuum tester can some percentage if the arrow to us green zone then normally I think that the vacuum test would have gone here, well, we do even better to
  • 24:19: in general, not a single bubble was present and Valve too rubbed [applause] [music]
  • 24:54: Now petrol Upload she has not got this rod for larger swing filter Noi typed and you are his motive
  • 25:36: [music] 1 kudo 2 did a button
  • 26:07: [applause] round [music]
  • 27:05: car car with gas equipment made the maximum allowable clearances thermal of the valves
  • 27:36: but someone took Well, better yet show me better the carburetor is regulated by another master us asked here not to poke your brain changed only the wires here zashkalivala was 80 should be somewhere up to 10 kilo But here it was 80 years in fact even more for
  • 28:07: myself but that's how it works communist release machine they certainly do not really want this time but you see how they work machines so but about the good yes, there is perhaps because they are sharp too Well, in the end, I learned to learn Yalta in the end. these ordinary ones are not sharpened
  • 28:39: I process the surface and perfectly everything then we did not get on fine later without lapping anything can be as if under This vacuum method would but decided to hedge this on 20 seconds total kept this machine 20 seconds she even there even Yes, and 10 seconds you need right away there are so many gates and wells not about
  • 29:10: pushed home comfort, too, until told not to climb there was a time as it would have been nice milling cutter Yes, because yes, if will flow yes again the claim will be of the type yes we will do poorly and should not