Plait From Beads WITHOUT hook and knitting. 2 WAYS. I open secrets.  See details »

 
Video subtitles:
  • 00:00: Hello! My name is Olya. And in this video I will show way to braid beads without hook. Externally, the wiring is very similar to knitting. And you can make it for any scheme of the Internet. First, choose a any weave pattern. Looking writing: Wiring scheme from beads. To search using the website Pinterest. I, by the way, also there. Who cares come to visit. Link
  • 00:34: It will be on video. I'll show you an example of this scheme on 16 beads. Will weave under the scheme that the middle in the technique of weaving brick. I have prepared beads 5 colors according to the scheme. I will weave a thread with a needle. I also used the Silicone food hose. Read more I talk about this
  • 01:17: in a few minutes. Cut filament length of 1.5 meters. threaded needle in one addition. Dial beads scheme first bottom row. It is 16 pieces. On the one hand leave a small tip of the thread. The other end of the thread with a needle - is working. Getting a brick fence.
  • 01:49: First passes a needle through the second bead on the edges. Delayed. Then we go through the third bead. Through the fourth. And so on. Through each bead to
  • 02:34: end of the row. About this technique on my channel there is a separate video. But I decided to show all the detail in this video, for your maximum comfort. By the way, smaller
  • 03:04: thread tip can be secured with tape at the beginning as I did it. We turn to the second row, in which
  • 03:50: one bead more. Because in the beginning of the series in
  • 04:51: After making the addition. Dial 1 yellow and 1 black. I am looking for some of the needle into the first gap between beads. Delayed. I deduce the needle top, through the black bead. Now,
  • 05:26: as before the end of the series, dial 1 piece. I am looking for some needle through bottom, the space between the beads. Delayed. I deduce through the top. It is important to bring the needle through one side,
  • 06:05: and out through the other. And so we are moving on the scheme, to 1 beads dialing and plants in each interval before the coming series. At the end of the series, as well as said dopletaem seventeenth bead. I dial. I am looking for some needle down through
  • 07:59: extreme bead and output the top through the yellow (that is, through that, that only that recruited). In the third series of 16 beads. dial 1 yellow. The needle is looking for some gap between the first beads.
  • 08:39: Delayed. I deduce the top through the yellow. And so according to the scheme until the end of a number is typed on 1 Thing. At the end of the row
  • 09:09: last bead just coincides with the last
  • 09:42: gap. In the fourth row 17 beads. At the beginning recruit 2 pieces - green and yellow. I am looking for some needle in the first interval. I deduce the needle through the top of the yellow
  • 10:17: bead. Then whip 1 piece. At the end of the row dopletayu 1 green. The following ranks are similar. Now show you how to add a new thread if over
  • 11:17: previous. I do it without knots, so it would not be markedly. The tip of the thread that was left with the needle, threading through neighboring beads. Thus, output the needle 10-15 beads. If I have a string in black, then I end up on the black beads that would be the most
  • 11:54: hide it. The thread can be cut. The new segment of yarn has slipped
  • 12:43: the needle. Do not take just too long string, that she would not get lost. And just over a black bead 10-15 pass through stuff, now in the reverse direction. And I deduce the same bead, where it was before running thread. Now you can continue weaving. I have already prepared
  • 13:52: full piece, according to another scheme. He has 15 beads. On which will show the next stage of work. Its length is almost 40 centimeters. It can be made longer, but at the back of the neck I'll have a chain. And now we need such a silicone
  • 14:22: tube. Full name: food grade silicone hose. It's easy to find in the hardware store. I bought in Epitsentre 1 meter about 5 hryvnia. And we It needs half a meter. They come in a variety of sizes. Its size, I will write under the video. On the edge tube must be screwed fittings. can be adapted coupling ring or a triangle. I will show
  • 14:53: for example rings, since they are more common among the accessories. Sharp object from two sides pipes to make holes. Unbend ring. insert in the holes.
  • 15:35: I press the pliers. Speakers silicone edge
  • 16:14: It can be cut. The edge of the tube is prepared. The braiding horse I do not cut the thread, it is now useful for stitching.
  • 16:49: I fold the piece into a circle. And I am looking for some needle into the beads, that act. Diagonally, like a zigzag. The thread is tightened well. Thus we connect a couple of centimeters circle
  • 18:07: and inserted into the tube. Is aligned with the edge. continue sew on, but inside a tube. Since there weaving, I had a single color, then note that
  • 19:06: when connecting circuits, it should coincide. For example, when you combine this scheme, the offset will be one row. This is nothing to worry, because we'll tip more dopletat. I'm almost sewed the whole segment. short until the end of a couple of centimeters. Cut off by the edge bead
  • 19:43: tube. Make a hole and insert the ring. As well as on the end. Doshivaem through. After I was stitched track, because I in the same seam pass the thread yet time. After spot stitched seamlessly. I pinned
  • 20:17: one more ring. And now I sutured beaded tip. Dial 1 for beads, but did not pass in each interval, and through one. Thus weaving will decrease with each row and somknetsya. Fixes the accessories. Here's what happened. tourniquet enough
  • 21:25: flexible. Its advantage is that it drags on any
  • 22:50: scheme from the Internet. It is very similar to knitting. During shooting I got another idea harness weave. Yet better, but it requires concentration on the chart. Now quickly I show the essence of weaving in this example. now We look at the first picture in the scheme, where all square edges.
  • 23:20: The first series of 18 beads I type in the same technique brick weave. Now connect the first to the last bead in a circle. When connecting, see to that weaving was not a twisted. Choosing a suitable size tube, what would it fits snugly. I wear ring of beads.
  • 24:04: And the Scourge of the second row. Technique is the same, but you need to follow for the pattern. It is important that at the forefront of it properly located. I dial one bead, looking for some
  • 24:35: needle with one hand gap deduce the other. dial the last bead of the second row. Brown I
  • 25:46: replaced the blue and on it I am guided in the right location pattern. I am connecting thread of the first and last of the second bead series. I dialed the third row. I look at that pattern would match with the circuit. Set all the rows comes under the scheme in the same direction,
  • 26:57: since netting in a circle. Here I am a bit proplela.
  • 27:31: Everything goes by the pattern. And done fast enough.
  • 28:09: All the questions I answer in the comments below the video On YouTube platform. So if you look through another site or a social network, note this. some questions are answered immediately. If filled with synthetic padding, then at the bend of the harness will dent. So that this method is not suitable. And the second question: to weave a bracelet this technique is not
  • 28:40: approach. Because it will be bad bend. Be sure to write your opinion. Did you like this master class? Just subscribe to my channel. Thank you all for watching.