Gennadiy Vishnik

Saved 2/9/17 7:35 PM from SLESARKA---№ 30

Mill from a roofing bolt for the engraver  See details »

 
Video subtitles:
  • 00:00: Hello this is one video on the topic improvised press engraver last video I I show as I did here are the friezes from conventional screws and in addition to this especially for video channel Falk kraft I show how they handle color metals I've got such a copper plate show how they and treated with copper Aluminum is such a Circuits will show you how they processed mini
  • 00:30: but it's a little later and now I want to show one more cutter made their own hands it is larger cutter with a very good productivity milling work either not worse than the factory and made her and out of the ordinary roofing bolts anyone interested see more here so it looks like this mill It is precisely
  • 01:02: as well as those here cutters for the same technology but first bolt here We need to prepare We need to grind off thread and grind hexahedron [music]
  • 01:52: [music] I hone until until it disappears all thread as I thread disappeared At once I stop and I get diameter shank from 3 to 3.2 millimeters That's just 32 10 millimeter of this most the size of which designed collet I continue this
  • 02:22: workpiece is installed on the Driver and grind hex head until will be clean cylindrical surface as the polished and on the chuck it and beating about Shank she did not will be I made some of
  • 03:32: shaped end spherical cylindrical and curly grind you need to carefully not to overheat the metal since the beginning these bolts are some hardening and They basically good hardness to this hardness is not lost metal in any case can overheating and now I find blanks We need to make incisions as I explained it In the first video for you cleverly and cutters will
  • 04:03: ready to go I made cuts
  • 05:11: I made with the head and I got here such friezes cylindrical cylindrical groove on the end hemisphere and curly I shall put in Prints and show how they work [music]
  • 05:45: [music] [music] [music]
  • 06:20: [music] [music] [music]
  • 07:02: from Now I put
  • 07:37: with a rounded cutter [music] [music]
  • 08:20: [music] [music] Well, as promised today
  • 09:49: I show like this one mill and the screw processes color metals [music] [music] [music]
  • 10:48: from
  • 11:23: at from from
  • 11:54: Now this result in Of course this cutter factory mill is not but none compare to those at least some of the work and can perform the more than you need to consider processing the metal We need to produce more powerful sander more low speed and higher torque here are turned recognizes the time to vote
  • 12:24: my work write comments all good luck in business and bye