Dasha Sidorenko

Saved 5/8/16 4:50 AM from Weaving from elastics.

Geksafish or fish ̆ a tail on six elastic bands of Rainbow Loom Bands. A lesson 13 - YouTube  See details »

 
Video subtitles:
  • 00:00: Hello! In one of the previous lessons we were making such quadruple bracelet called fish tale or a quadrafish In today's tutorial we are going to plat more complicated bracelet, it is Hexafish which consists of 6 rubber bands placed around Quadrafish consisted of 4 rubber bands platted around. So platting of Hexafixh takes more time, but I hope you will cope with it Because it's worthy of that time. As a result you'll get such a nice thin bracelet We are going to see how to make it right now
  • 00:32: Situate a bottom loom in such a way to place open side of pegs in front of you or look rightwards And prepare 6 rubber bands of the basis color This is the color that won't be used in the bracelet, but we need it at the very beginning We are going to remove this color later. I am going to use a black color as a basis color We put rubber on bands in the next way. Put it like this, twisting it in eight shape, then put one band here and twist it in eight shape Draw your attention to the fact that I have removed a third row of pegs as we need just two rows
  • 01:09: Put a band here and twist it in eight shape Twist a rubber band in eight shape and put here, then place a band twisted in eight shape here and place a rubber band twisted in eight shape We have got such a pattern. Then you should take bands of the color you will use for making a bracelet I will use pink, white and green colors to make my bracelet. So first of all I put on a rubber band of a pink color. Done As for the first time we need to put on two rubber bands instead of one band. In the next layers while platting we are always going to use one rubber band
  • 01:49: Now we need to grasp black rubber bands from outside and put them inside this long square here and now we move bands from outside from this peg We grasp two black rubber bands here from the outside and put them inside You may turn a bottom loom a bit to situate it convenient. Also you should do the same in this row
  • 02:20: Take black rubber bands from here and put them inside. Grasp the band here from the outside to be accurate and place it inside You can hold it with a finger to prevent bands from slipping. Here we also take rubber bands from outside and put them inside. Great job! The next color we are going to use is a white color. So I take rubber band of a white color and put it onto all four pegs. Done Then we need to do the same thing as we did with black rubber bands. We take the lowest rubber band
  • 03:00: We grasp it here and put inside of this square. Then we need to grasp it here One band, we put it inside from the outside inside. Here we do the same – divide these two rubber bands, take one rubber band and put it inside The same thing should be done here, divide two pink rubber bands and move one inside
  • 03:32: We divide bands here, take the lowest pink rubber band, put it inside. The same procedure should be done here. Done That was the last rubber band of a white color. As I'm going to plat by pairs of pink, white and green two pink rubber bands, two white rubber bands and two green rubber bands, I need to put one more white rubber band
  • 04:03: I put it on. We need to do the same procedure with the lowest third pink rubber band Move rubber bands from each peg inside from the outside By the way such bracelet may be platted not only on 6 pegs, but also on 8 pegs However it takes to long to plat it. It may take an hours to plat a few centimeters. So it's much faster to make it on 6 pegs
  • 04:37: Here we have two white rubber bands, there will be a green color after white color, that's why I put on a green rubber band and continue taking off the bands I take it off from here. Here I divide the bands and take one off. I divide the bands here and move one inside The same thing I do here. Then I divide it here and move inside. We grasp the lowest rubber band and move it inside
  • 05:13: And also we need to grasp the lowest rubber band here and move it inside There is one green rubber band and we should put another one in the next layer So we put it onto the top of the pegs and take off white a white rubber band in the same way that is inside Remove it from here. It's the lowest one. We remove it from here, here. Grasp it here and remove it too
  • 05:47: Here we are going to grasp a rubber band too and remove it too. And so on. Reach such a length of a bracelet you need The bracelet will come out from here. I have made a little semi-product. Look here, I have reached a needed length of the bracelet Here there is the situation like this and it came out from here. Now we need to end up this bracelet in some way
  • 06:28: We are going to end it up in the next way. Now there are two rubber bands on each of 6 pegs. There are two rubber bands We need to move this lower rubber band and put it inside. We need to do this on each peg Move it from here, then move it inside from here, then we put it inside as usual from here Here we also take a rubber band off and put it inside. Here we also grasp a rubber band and put it inside
  • 06:58: Now we have one rubber band on each peg. However, we should turn these 6 rubber bands into 3 So let's do the next thing. We are going to move this rubber band onto this peg We are going to move this rubber band onto this peg. Then we are going to put this rubber band onto this peg
  • 07:28: Done There are two rubber bands on each peg. We need to move inside the lowest rubber band from the outside again We move it here, here, and also here, we grasp the second one and put it inside Then we need to move three rubber bands onto one of the pegs. For example, we take this one
  • 08:05: I take this rubber band and move it onto this peg. Then grasp a rubber band from here and put it onto this peg too There are three rubber bands and now we need to place a clasp on them. We put it onto all three rubber bands The clasp has been put on so we can remove the bracelet
  • 08:35: This end is completed, but the end we began with has such a result for now Look, there are one, two, three, four, five, six – six pink rubber bands. We need to put them onto these 6 pegs to conclude platting To make it more convenient you can pass this this bracelet through the bottom loom Now we need to grasp each pair of pink rubber bands from here and put them onto the pegs
  • 09:09: Grasp a pair of rubber bands and put them onto here. Then we need to grasp this pair of rubber bands too I grasp it and put onto the next peg. Great. We need to grasp these pair of pink rubber bands We grasped them, and going to put onto this peg. We have three pegs left to put rubber bands onto. Done
  • 09:59: We have put on all the rubber bands. Then we can cut these black rubber bands with scissors We cut off all the black rubber bands as we won't need them any more. Done
  • 10:32: Now we need to end this platting in the same way we did it at this end. First of all we have to remove the lower rubber bands from all pegs Remove a rubber band from here, then remove one from here, remove a rubber band from the outside here, remove a band inside from here and here I use two hooks, sometimes I need a thiner one, because rubber bands are tight and it's better to use a thin hook to catch a rubber band
  • 11:26: When there's a big strain I use a firmer hook Now we need to make 3 rubber band out of these 6 ones We take it off this peg and put onto here, we have removed it from here and put onto here Then we are going to remove a rubber band from this peg and put onto here
  • 11:57: And now we are going to remove band from here and put onto here. Done. We need to remove the lower rubber bands inside from the outside We remove one from here. Remove one from here and remove one from here too Then we need to put rubber bands from three pegs onto one peg. For example, onto this one We take a rubber band from here and move it onto this peg. We move one rubber band from here onto this peg
  • 12:31: Well done! Generally, it's ready. Then we are going to pull out the bracelet from here not to clasp it around the loom We are going to strain these rubber bands. You may put them onto this peg to make it easier to put on the clasp We put on the clasp through all three rubber bands. Done. Then we remove it
  • 13:04: This is the bracelet we have made. It's quite thick. You should pull the bracelet in a wider place When you stretch the bracelet it will become of a more even shape Press like if you enjoyed this video lesson, subscribe to my channel. See you in the next video lessons where we will continue to plat some bracelets. Good bye!